202 permanent maintenance technician jobs found for you.

Key Responsibilities:Perform routine and preventive maintenance on electrical systems and equipment, including transformers, HT/LT panels, motors, and compressors.Conduct electrical troubleshooting to identify and resolve faults in a timely manner.Ensure all electrical installations and maintenance work comply with safety standards and regulations.Maintain, inspect, and test earthing systems and electrical grounding infrastructure.Support utilities

Key Responsibilities:Perform hands-on preventive and corrective maintenance on mechanical systems such as pumps, gearboxes, blowers, conveyors, rotary equipment, valves, and chillers.Diagnose and troubleshoot mechanical issues to identify root causes and carry out timely repairs.Carry out equipment alignment and balancing procedures as required.Ensure all maintenance activities comply with safety, health, and environmental regulations.Maintain accurate

Develop preventive and predictive maintenance schedules.Monitor daily breakdowns, analyse root causes, and implement corrective actions.Minimize equipment downtime and maximize asset reliability.Lead, train, and develop maintenance technicians/engineers.Allocate resources, assign tasks, and monitor performance of Machines.Manage AMC (Annual Maintenance Contracts) and third-party service providers.Analyze maintenance KPIs (MTTR, MTBF, OEE, breakdown

We are looking for a skilled and experienced EV lab technician to join our team. As technician, you will be responsible for installing, maintaining, and repairing electrical/EV systems and equipment in various settings. You will also troubleshoot and diagnose problems, perform preventive maintenance, and ensure compliance with safety standards and regulations.To be successful as an EV technician, you should have a solid knowledge of electrical principles

We are seeking a highly skilled and motivated Engineer / Senior Engineer to join our team, specializing in the maintenance, troubleshooting, and continuous improvement of Special Purpose Machines (SPMs). The ideal candidate will be a hands-on problem solver with a strong technical background in mechanical, electrical, and automation systems. This role is critical to ensuring minimal downtime, maximizing equipment reliability, and supporting production

1.  Able to attend to all electrical-related works, cable routing, and machine commissioning.2. Should be able to handle the breakdowns with the team and individually.3. Should have 11 kVA or 33 kVA electrical lenience.4. Liaison with TSPDCL.5. Awareness of motors, PLC, HMI, ladder drawings, electrical circuits and related works.6. Awareness of EMS, QMS, and OSHAS Documentation.7. Awareness on 5S Implementation and Guidance to Supervisor and below.8. Able

1. Able to attend to all mechanical-related work.2. Should be able to handle the breakdowns with the team and individually.3. Awareness on 5S Implementation and Guidance to Supervisor and below.4. Able to plan and implement preventive maintenance according to the schedule.5. Should have good knowledge of pneumatic and hydraulic circuits.6. Should have decision-making skills.7. Liaison with other departments.8. Awareness of fasteners, weld joints, and

● Should have well knowledge about Utility Operations● Should have knowledge of use of PPE's, fire extinguishing & Work Permit● Should have basic knowledge of IMS system● Should have knowledge of legal requirement of Utility’s equipment’s● Should understand functional safety, ensuring compliance with relevant health and safety regulations and quality standard.● All types of operation and maintenance should be performed. (Utility equipment’s)● Maintain

Key Performance Areas:1. Co-ordinating quality checks for process parameters as per desired frequency.2. Ensuring product quality at standard with Quality best practices.3. Prepare SOP and checklist of all quality process.4. Safety and upkeep of the assets of the organization.5. Directly responsible RM PM testing.6. Ensuring Calibration of lab instruments.7. Ensure CCP monitoring and control.8. Responsible for NPD product trial quality compliance.9.

Maintenance InchargeJob OfferAre you a highly skilled and experienced maintenance professional seeking a challenging contract position in the plastics industry? This is an excellent opportunity to contribute your expertise to a dynamic company based in Maihar, Madhya Pradesh. If you're ready to take on a leadership role in maintaining critical injection molding equipment, we encourage you to apply!Experience7-10 yearsSkillsInjection Molding Machine

Key Responsibilities:Breakdown & Downtime Reduction:Play a key role in minimizing machine breakdowns and process downtime through effective maintenance strategies.Implement quarterly reviews and improvement plans to enhance equipment reliability.Maintenance Planning:Plan and execute Preventive & Predictive Maintenance for all plant machinery.Monitor machines using Daily Check Sheets and Monthly Maintenance Schedules.Reporting & Documentation:Prepare and

​​​​​​Conduct regular preventive maintenance on CNC machines (VMC, HMC, Turning, Milling, etc.) and related electrical panels and systems.Troubleshoot and repair electrical issues in CNC machines, including problems with drives, motors, encoders, PLCs, HMIs, and control wiring.Calibrate and verify CNC machine electrical components to ensure precise operations.Read and interpret electrical schematics, machine wiring diagrams, and control layouts.Assist in

Role Description Lead and mentor a team of electrical and instrumentation designers and engineers.Develop and review design plans, specifications, and schedules for electrical and instrumentation systems.Conduct site visits and surveys to gather data and identify project requirement.Ensure compliance with industry standards, regulations, and company policies.Collaborate with cross-functional teams, including process, mechanical, and civil

Execution of preventive maintenance, Breakdown maintenanceof electrical equipments.● Co-ordination with other team members during shift activities.● Able to handle D.G. operation & Power C/O induividually● Possess basic knowledge of Electrical System (HT,LTDistribution,Trafo,D.G. Set, UPS,battery, PCC, MCC)● Monitor,execute maintenance and inspection plans.● Should understand functional safety, ensuring compliance withrelevent health and safety

Shift Leader - Electrical (Ask for License)Diploma / ITIElectrical Supervisor Electrical LicenseDiploma with 5 to 10 Yrs. / ITI with more than 10 Yrs.Textile/ Polymer / POLYESTER● Should conversant with operation and maintenance of utility equipment's like chillers,compressors, steam boilers, thermic fluid heaters, Nitrogen plants, DG sets, etc....● Should conversant with operation and maintenance of switchgear, protection relay, motor,transformers, VFD.●

Responsibilities:Perform assembly, commissioning, testing, repair and maintenance on wind turbine generators and related equipment at wind farm, either electrical or mechanical.Conduct and review safety analyses of potential electrical and mechanical hazards in the wind turbines, switch room, and the O&M building.Support Root Cause Analyses to assist in determining equipment failure and the reasons for failures when they occur.Complete required and

Planning and execution of maintenance activities.Utility Log sheet monitoring.Co- ordination with all departments pertaining to maintenance activity.Review utility consumption report on daily / monthly basis.Preventive maintenance of all the equipment monitoring.Ensure calibration of instruments as per the plan and test certificates.Approve the Indent of spare, accessories.Monitoring of maintenance as per schedule & at urgency without hampering on quality

Key Responsibilities:     1. PLC Programming & Troubleshooting  Write, modify, and troubleshoot ladder logic and function block diagrams in GX Works2/3 or GX Developer.  Diagnose and resolve PLC faults to minimize downtime.  Adjust or optimize existing programs based on machine or production requirements.     2. Integration & Commissioning  Integrate Mitsubishi PLCs with HMIs (e.g., Proface,GOT series) and SCADA systems.  Commission new control panels or

Desired Skills and Experience:3-5 years’ experience from Automotive or Manufacturing organization.•Must have sound knowledge in Machine shop workings.•Must have exposure on CNC Machines, Electrical drives, AC / DC drives, PLC, Electrical furnace,Compressor, servo motors, power circuits, Assy machines, I/O devices, instrumentation etc.Should exposure, knowledge, skills & experience in troubleshooting, problem solving, modifications in PLC,preferably

HSE : ► Conduct interactive sessions with contractors/contract employee to promote HSE policy ► Ensure timely closure of safety actions pertaining to incident investigation, SMT tours & safety audits ► Ensure that safety procedures are being followed at site2) Resolution of customer complaints : ► Improve efficiency of emergency response team ► Ensure availability of all requisite tools, services and tackles3) Liaise with internal stakeholder : ►

1. Field Service Manager to handle Toyota Dealer Service Operations 2. After Sales operation Management 3. Support dealer in carrying out Service Business, Customer Satisfaction enhancement activity 4. Implementation of Toyota standards and monitoring. 5. Making service marketing strategy and execution of the same 6. Making and executing strategy to enhance market share and parts retails 7. Making and executing strategy related to body and paint business

Job Title: Moulding Plant HeadLocation: Spectrum Electrical Industries Limited, JalgaonDepartment: Manufacturing/OperationsRole Overview:As the Moulding Plant Head, you will be responsible for leading and driving the technical andstrategic operations of the moulding plant. Your role will focus on ensuring the highest levels ofoperational efficiency, product quality, and innovation while aligning with the company’s long-term goals. This position requires a

Job Location - Vallam, Sriperumbudur,  https://www.fst.comCompression Molding EngineerExperience Level: 4–5 years preferredIndustry: Manufacturing / Automotive / Plastics / Rubber experience6

Bachelor of Engineering degree in Mechanical Engineering, Manufacturing Engineering, or related field. Minimum 7 years of experience in CNC Programming, VMC or HMC (Fanuc / Siemens Controller), Precision Machining and hands on experience with Optimizing cutting speed (Vc), feed rate (f), depth of cut (ap, ae) for tool life vs productivity in a Manufacturing environment. Expertise in CAD & CAM software (Mastercam, Siemens NX, SolidWorks) and High-speed

Role: Junior EngineerDepartment: ElectricalQualification: Diploma in Electrical and Electronics EngineeringExperience: Min. two yearsLocation: Elavur, Tamil NaduMandatory Skills: Should’ve worked in Electrical Maintenance. Proficiency in tamil is mandatoryJob ResponsibilitiesDaily shift handlingBreakdown Maintenance and route cause analysisPreventive MaintenanceKnowledge of SAPMotor overhaulingSafety aspects. Motor overhaulingexperience9

List of job expected to be performed by Team Member:Preventive Maintenance of Assembly Equipment's - Filling equipment's [Oil,AC,LLC,etc]      Body lifters, nut runners (atlas copco), bush press machines, Laser number punching,     friction drive systems, Sealer robots (Kawasaki), Line conveyors.2. Able to work on Function Line Equipments - Brake, Drum, Alignment, Shower.3. Able to carryout caliberation of Function Line equipments.4. Able to understand &

Desired Skills and Experience: 3-5 years’ experience from Automotive or Manufacturing organization. •Must have sound knowledge in Machine shop workings. •Must have exposure on CNC Machines, Electrical drives, AC / DC drives, PLC, Electrical furnace, , servo motors, power circuits, Assy machines, I/O devices, instrumentation etc.Should exposure, knowledge, skills & experience in troubleshooting, problem solving, modifications in PLC, preferably Mitsubishi,

Protected# Toyota Kirloskar Motors Pvt Ltd Human Resource Division Job Description Form 1) Required Profile of candidate: Vacancy Description (Example : Sr. Officer-Sales operation)Years of Experience  (Range) Age Group Education QualificationSenior Team Leader /  Group Leader Assembly  Maintenance5 ~ 7 years24 ~ 27Diploma in Elect/Mech Engg Diploma in Mechatronics  Engg - Preference 2) List of job expected to be performed by Team Member: 1. Preventive

Position – Projects & Engineering / AGMLocation – Vemula, MahbubnagarExperience – 15 to 20 YearsEducation - Graduate in Electrical and ElectronicsAn SPM automation manager oversees the design, development, and implementation ofSpecial Purpose Machines (SPMs) for automated assembly linesHe leads teams, manages projects, and ensures compliance with technical standards, whilealso handling budgets and timelines. He ensures that the designed machines will

Main roles and responsibilities Overseeing the manufacturing processes, ensuring quality work is done in a safe and efficientmanner. Coordination with other engineers/ Supervisors / Managers to develop plans that improveproduction, costs, and labour required. Diagnosing problems in the production line and providing recommendations, training and solutions. Keeping abreast of advancements in engineering and production, and play active role in